G0 Fixture Plates
G0 Grip Module
*Lead time is currently 8-10 weeks*
The G0 grip module is a SLS printed grip that the G0 chassis installs into, in order to complete the lower part of the G0 pistol.
This product also includes the G0 Special Parts kit, a series of pins and springs required to secure the G19 LPK into the milled G0 chassis. These are:
- 1x rear FCG pin: 3mm diameter, 18mm long dowel pin
- 1x front FCG pin: 4mm diameter, 22mm long dowel pin
- 2x grip module pins: 3mm diameter, 28mm long slotted spring pin (these replace the dowel pins in the G19 Gen 3 LPK)
- 1x slide lock spring: 0.12″ OD, 0.016″ wire, 0.25″ long coil spring
This grip module is made from high-quality SLS, which is heat resistant and will facilitate G0 longevity. You can also print your own grip module at home using the file available for free at DEFCAD.com.
Note: this product does not include the pins needed to install the assembled chassis into the grip module. These pins are instead included in any G19 Gen 3-style lower parts kit.
G0 Non-Frame Hardened Steel Block (for GG3-S)
*Lead time is currently 8-10 weeks*
This is a properly-sized steel block that can be machined on the Ghost Gunner 3 into the G0 zero percent pistol chassis.
The G0 Starter Kit includes all the required machine tools, fixtures and code to perform the machining operations.
Note: this block is for GG3-S owners with the hardware upgrade. GG3 owners without the hardware upgrade should purchase the G0 Non-Frame Block for GG3.
Details:
- Material: 4140 Steel
- Sizing: 1.25″ W x 1.75″ H x 7″ L
Note: either GG3-S or GG3 with free firmware upgrade is required for G0.
G0 Non-Frame Stainless Steel Block (for GG3)
*Lead time is currently 8-10 weeks*
This is a properly-sized 303 stainless steel block that can be machined on the Ghost Gunner 3 into the G0 zero percent pistol chassis.
The G0 Starter Kit includes all the required machine tools, fixtures and code to perform the machining operations.
Note: this block is for GG3 owners without the GG3-S hardware upgrade. It is not as strong as the GG3-S block. GG3-S owners with the hardware upgrade should purchase the G0 Non-Frame Block for GG3-S.
Details:
- Material: 303 stainless steel
- Sizing: 1.25″ W x 1.75″ H x 7″ L
Note: either GG3-S or GG3 with free firmware upgrade is required for G0.
G0 Special Parts Kit
*Lead time is currently 8-10 weeks*
The G0 Special Parts Kit contains all special lower parts required to assemble the G0 that aren’t already included in a standard G19-style Gen3 lower parts kit.
These parts are:
- 1x rear FCG pin: 3mm diameter, 18mm long dowel pin
- 1x front FCG pin: 4mm diameter, 22mm long dowel pin
- 2x grip module pins: 3mm diameter, 28mm long slotted spring pin (these replace the dowel pins in the G19 LPK)
- 1x slide lock spring: 0.12″ OD, 0.016″ wire, 0.25″ long coil spring
Note that these special parts are also included in the G0 Grip Module product.
G0 Starter Kit
Learn more about G0 Zero Percent Pistol at g0.ghostgunner.net