Learn more about G0 Zero Percent Pistol at g0.ghostgunner.net
G0 Non-Frame Hardened Steel Block (for GG3-S)
$80.04
*Lead time is currently 8-10 weeks*
This is a properly-sized steel block that can be machined on the Ghost Gunner 3 into the G0 zero percent pistol chassis.
The G0 Starter Kit includes all the required machine tools, fixtures and code to perform the machining operations.
Note: this block is for GG3-S owners with the hardware upgrade. GG3 owners without the hardware upgrade should purchase the G0 Non-Frame Block for GG3.
Details:
- Material: 4140 Steel
- Sizing: 1.25″ W x 1.75″ H x 7″ L
Note: either GG3-S or GG3 with free firmware upgrade is required for G0.
Description
Shipping & Delivery
Shipping and Returns
Shipping
We are pleased to offer shipping via UPS Ground or 2-Day Air for all items.
Returns
We are committed to ensuring your satisfaction. If you find any non-firearm merchandise defective upon receipt, we will gladly accept returns and provide your choice of a replacement item (subject to availability) or a full refund. Please note that Arm Safe Supply cannot be held responsible for items damaged during shipping. In such cases, we kindly ask you to file a claim with the carrier. Should you receive a defective item, please call us immediately at +1 713 766 9931 to request a return label.
Important Information for Firearm Returns
We kindly request that you thoroughly inspect all firearms before proceeding with the transfer. Once a new firearm is transferred to you, it is considered used, even if it remains unfired. As a result, we are unable to provide a full refund for new firearms after they have been transferred into your possession. Please note that we do not reimburse FFL transfer fees on returned items.
We understand that some manufacturer defects may not be identifiable during the initial inspection. If you discover a defect after the transfer, the firearm must be returned directly to the manufacturer for replacement or repair in accordance with their warranty policy. This approach allows you to avoid the additional transfer fees associated with returning the firearm to us through your local FFL dealer.
Please do not send defective firearms directly to Arm Safe Supply. Manufacturer-repaired firearms can be returned directly to you without additional FFL transfer or associated fees. However, if the manufacturer decides to replace the firearm, the replacement must be transferred through your local FFL dealer to document the new serial number.
Ammunition Sales
Please note that all ammunition sales are final.
By using and ordering from our site, you agree to these terms. We appreciate your understanding and thank you for your cooperation.
Related products
Armory Craft P320 Slightly Curved Trigger Dual Adjustable
Armory Craft Slightly Curved Trigger, Dual Adjustable for the SIG P320, NEW.
This is a new Armory Craft dual adjustable Slightly Curved Trigger for the SIG Sauer P320. It’s a drop-in replacement trigger designed to reduce trigger pull by 30% while still utilizing the factory sear springs. Features smoother, consistent pull, improved geometry and dual adjustment (pre-travel and overtravel. This quality trigger is CNC machined out of billet steel (not MIM) and should work with most post-upgrade P320s in 9mm, 40SW, 357SIG, 10mm and 45ACP (manual safety or non-manual safety versions). This is a drop-in replacement for the stock trigger.
Includes: Armory Craft Slightly Curved, Dual Adjustable trigger and set screws. No Slide, chamber flag, grip, etc. included. MADE IN USA.
ETS P320 Extended Magazine 9mm 30RD
NEW, ETS SIG Sauer P320 Extended 9mm Magazine, 30 Round.
An extended magazine for the SIG SAUER P320 pistol. Fits all P320 models including full-size and carry P320s, X-Carry, M17, M18, X-FIVE (with magwell extension) chambered in 9mm. Will also fit compact, X-compact and subcompact models, but magazine will extend past grip.
Clear, high-strength polymer, Glock-style baseplates, impact-resistant, lifetime warranty thru ETS.
Standard capacity magazines are not available in restricted states, such as CA, CT, CO, DC, HI, MA, MD, NJ, NY, VT
SIG Sauer P320 Standard Height Sights: XRAY3 Round Notch 8/8 Kit
SIG Sauer P320 Standard Height XRAY3 Sights, Round Notch, 8 & 8, NEW.
This is a set of new SIG P320 standard-height front and rear sights for the P320 slides, #8 Front and #8 Rear. These sights will work with most Factory SIG P320 9/40/357/45 slides and the same sights that come on most full-size and compact slides. Rear sight features round notch for quick sight alignment. Ideal for use with factory and aftermarket slides. Should fit most P320 slides or aftermarket P320 slides with factory dovetails. May fit other P-Series pistols (P220 .45, P226 .40, P938).
Includes: SIG Sauer P320 Standard Height XRAY3, round notch sight set (#8 front and #8 rear).
No Slide, chamber flag, grip, etc. included
PLEASE NOTE: The higher the front size number, the lower the height of the sight. For the rear sight, the higher the number (i.e. 8), the higher the height of the sight.
EXAMPLE: If you wanted a taller front sight post and a taller rear sight, choose a #6 front sight / #8 rear sight. #8 front / #8 rear point of aim would be higher than #6 front /#8 rear.
Sig Sauer® P320™ | Lower Parts Kit – 9mm/.40/.357
This LPK is for Sig Sauer P320 builds and has all the lower parts used to complete your Sig Sauer P320 Compatible MUP-1
Wilson Combat Carry Grip Module P320 Black
Wilson Combat P320 Carry Grip Module, Black
This is the newly released Wilson Combat Grip Module in Black for any P320 FCU. It will fit 9mm, 40SW, 357SIG (Not 45ACP). Will function with any length slide. Full size slide will extend past the rail, Carry or Compact slides will be flush with the grip rail. Internal slots allow for the addition of rod-style weights.
Perfect for your custom P320 build! Accommodates full-size magazines or longer (17RD 9mm or 14RD .40SW).
No additional parts are included!
Includes: 1 Wilson Combat Carry Grip Module (Black) with OEM magazine catch.
