CENTURY ARMS VSKA AK47
ARK charging handle – black anodized
Designed, manufactured, and assembled by Riptide Rails, the non-reciprocating Riptide Charging Handle is an upgrade to the DIY and printed charging handles for Invader Zip’s Ark! Mil Spec MIL-A-8625 Type II anodize (black) finish.
While the Riptide Charging Handle was designed for the Ark, there are other weapon systems that will be designed to use it as well.
ARMASPEC Anti-Walk Trigger/Hammer Pins
Armory Craft P320 Flat Trigger, Dual Adjustable
Armory Craft Flat Trigger, Dual Adjustable for the SIG P320, NEW.
This is a new Armory Craft dual adjustable FLAT Trigger for the SIG Sauer P320. It’s a drop-in replacement trigger designed to reduce trigger pull by 30% while still utilizing the factory sear springs. Features smoother, consistent pull, improved geometry and dual adjustment (pre-travel and overtravel. This quality trigger is CNC machined out of billet steel (not MIM) and should work with most post-upgrade P320s in 9mm, 40SW, 357SIG, 10mm and 45ACP (manual safety or non-manual safety versions). This is a drop-in replacement for the stock trigger.
Includes: Armory Craft Slightly Curved, Flat trigger and set screws. No Slide, chamber flag, grip, etc. included. MADE IN USA.
Armory Craft P320 Slightly Curved Trigger Dual Adjustable
Armory Craft Slightly Curved Trigger, Dual Adjustable for the SIG P320, NEW.This is a new Armory Craft dual adjustable Slightly Curved Trigger for the SIG Sauer P320. It’s a drop-in replacement trigger designed to reduce trigger pull by 30% while still utilizing the factory sear springs. Features smoother, consistent pull, improved geometry and dual adjustment (pre-travel and overtravel. This quality trigger is CNC machined out of billet steel (not MIM) and should work with most post-upgrade P320s in 9mm, 40SW, 357SIG, 10mm and 45ACP (manual safety or non-manual safety versions). This is a drop-in replacement for the stock trigger.Includes: Armory Craft Slightly Curved, Dual Adjustable trigger and set screws. No Slide, chamber flag, grip, etc. included. MADE IN USA.
Aves DDxx.2 Rear Rail Upgrade
These rails are laser cut and bent on an industrial press brake ensuring the highest quality achievable. Designed and tested in collaboration with Deterrence Dispensed to ensure the perfect fit in your frame.
These rear rails are the same as what is offered in the FMDA DD17.2, DD19.2 and DD26.2 rail kits. Because the front rail from a version 1 G17 and G19 kit are unchanged with version 2 this is all you need to upgrade your old kit.
These rails are shipped in a 3d printed holder to ensure safe transportation of the rail. Simply push the pin out of the printed holder and install it in your frame.
Aves FMDA DD17.2 Rail Kit
Aves Rails is pleased to offer the first commercially available rail kit for the next generation of printed Glock style frame. The FMDA DD17.2 is the most versatile and strongest design available today.
The front rails for this kit are the same high quality and high tolerance rails that are offered in the original FMDA G17 rail kit. The rear rails are an all new design specific to the various DDxx.2 frames. Made from high quality stainless steel. Precision formed to fit your frame perfectly every time. The rear rails are supported by the frame as well as the trigger components. Because of this we have developed a holder to be used in transit to protect your rear rails until they are ready to be installed. This ensures they are the proper size upon delivery, providing you with the easiest assembly of any printed frame.
To complete a DD17.2 frame you will need these rails, a lower parts kit for a gen 3 G17 and a compatible slide for a gen 3 G17.
Aves FMDA DD26.2 Rail Kit
The FMDA DD26.2 brings the ease of assembly and durability of the DD17.2 and DD19.2 to an even more compact frame.
The front rails for this kit are a completely new design to the DD26.2. Designed by Deterrence Dispensed and initially prototyped by Aves Rails, we are proud to have participated in their development. The rear rails are an all new design specific to the various DDxx.2 frames. Made from high quality stainless steel. Precision formed to fit your frame perfectly every time. The rear rails are supported by the frame as well as the trigger components. Because of this we have developed a holder to be used in transit to protect your rear rails until they are ready to be installed. This ensures they are the proper size upon delivery, providing you with the easiest assembly of any printed frame.
To complete a DD26.2 frame you will need these rails, a lower parts kit for a gen 3 G26 and a compatible slide for a gen 3 G26.
BORE BOSS®
WORLD’S EASIEST BORE CLEANER
The single piece Dual Action Cable with integrated phosphor bronze brush and braided mop wraps around the unique Flex-Case Handle to keep the system stowed and organized. To use, simply flip, feed, clip, and pull. Throw it in your pack, or put it in your pocket. It’s the next best thing to a self-cleaning gun.
Chip Cover for GG3
Discontinued clear plastic chip cover for GG3.
GG3-S cover can be found here.
CMC Single Stage Match Trigger – Curved 2.5lb
CMC’s innovative, self-contained and easy-to-install AR-15 trigger groups have been completely re-tooled to maximize production capacities, incorporate new design enhancements and reduce cost. CMC’s AR-15 trigger groups have always yielded exceptional trigger pull dynamics for thousands of satisfied customers.
CMC Single Stage Match Trigger – Flat 2.5lb
CMC’s innovative, self-contained and easy-to-install AR-15 trigger groups have been completely re-tooled to maximize production capacities, incorporate new design enhancements and reduce cost. CMC’s AR-15 trigger groups have always yielded exceptional trigger pull dynamics for thousands of satisfied customers.
