KAK COMPLETE AR15 UPPER RECEIVER – 7.62×39 – 16″ BARREL – 13″ MLOK
KAK K-SPEC Enhanced AR15 Carrier- Downward Vents
KNS AR15 Push-Button Pivot/Takedown Pins Combo
KNS Push-Button Pivot/Takedown Pins for completing your Zero Percent Build.These pins have a spring-loaded push button that, when pushed, retracts the stainless steel detents for easy pin removal. The steel housing has a black oxide finish. The button also has a drilled cross hole which allows for the installation of a seal wire to prevent tampering with the guns internals. The pins are fitted with an end cap to simplify pin removal and installation. It also prevents any debris from entering the internal parts of the pins.
LUTH-AR M16A2 3 Round Burst First Parts Set M-16
ALL NFA RULES APPLY! These LPKs can be legally sold to retail consumers, dealers, and manufacturers, and are intended to be used ONLY as replacement parts for registered receiver weapons and post sample builds by licensed Type 7 FFL holders with an SOT. Use of these parts without the proper licensing is a violation of the law! They will NOT be shipped to NJ, CA, CO, NY, WA, and Washington DC*Allow up to 2 weeks for shipping*
LWRC Compact Adjustable Stock – FDE | AR-15
The LWRC International Compact Stock is a drop-in replacement for AR15/M16 carbines with mil-spec diameter buffer tubes. It is a lightweight, no-nonsense stock that features integral sling attachment points, one-handed adjustment, and an excellent cheekweld.The LWRCI Compact stock weighs in at only 7.9 oz.
LWRC Compact Adjustable Stock – FDE | AR-15
The LWRC International Compact Stock is a drop-in replacement for AR15/M16 carbines with mil-spec diameter buffer tubes. It is a lightweight, no-nonsense stock that features integral sling attachment points, one-handed adjustment, and an excellent cheekweld.The LWRCI Compact stock weighs in at only 7.9 oz.
Matrix Arms Foxtrot 9.5″ AR-15 M-LOK Free Float Handguard – Black
An unbeatable value, the Foxtrot M-LOK 15″ Handguard by Matrix Arms is a quality hard coat anodized rail featuring a straight forward install process and quality hardware. This free floating, slim profile handguard has a continuous 1913 Picatinny rail. It is manufactured using 6061 T6 Aluminum and the high quality anodizing makes for a durable structure and quality, resilient finish. The M-LOK slots allow for a variety of accessories and attachments to be used.
MOE® Carbine Stock – Mil-Spec
The MOE Carbine Stock – Mil-Spec model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.The Mil-Spec Model includes a standard 0.30″ thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.Made in the USA.
ORCA AR-15 BUILD KIT
The Orca is an AR-15 rifle with a 3D printed upper and lower system. It is a preeminent member of a new generation of printed ARs that support printing the upper receiver as well as the lower. The goal of the project is to print as much of the AR-15 as possible, without compromising the performance.The following components that would be on a factory AR-15 have been replaced by printed or non-firearm parts, or made unnecessary:
- Upper
- Lower
- Handguard
- Buffer tube
- Barrel nut
- Stock
- Grip
- Takedown pins
- Buffer retainer
P90 Clear Polymer 50rd 5.7×28 Magazine
PMAG 30 AK47/AKM 7.62×39 (GEN 3) magazine
The PMAG 30 AK/AKM MOE is a durable, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles (AK-47, AKM, AKS, and others) in 7.62×39 mm. It features a removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the performance you expect from a PMAG.Made in U.S.A.
PMAG® 30AR 300 Blackout Gen M3 Magazine
The PMAG 30 AR 300 B GEN M3 is a purpose-designed magazine for rifles chambered in 300 Blackout®. Since its inception, 300 BLK shooters have had to use a magazine designed for another cartridge, limiting its ultimate performance and compatibility. One of the key features of 300 BLK is the compatibility with 5.56x45mm parts, but with the magazine, it is a compromise to do so. Due to the wide variety of projectile weights and profiles potentially decreasing overall reliability, a dedicated 300 BLK magazine was a logical step for the PMAG line.In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your 300 BLK rifle. When using 5.56x45mm mags, the potential to chamber and fire a 300 BLK round in a 5.56x45mm rifle with catastrophic results requires diligent ammunition management by the shooter. The PMAG 30 AR 300 B’s distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues. Along with optimized 300 Blackout performance, the PMAG 30 AR 300 B incorporates all of the GEN M3 features such as our next-generation impact and crush resistant polymer, aggressive front and rear texture, an easily removable slim floor plate, a paint pen dot matrix for marking and identification, and a dust/impact cover. Blackout is a registered trademark of Advanced Armament Corp.Made in the USA
Premium Classic LPK Black
Remington Model 700 Ultimate Muzzleloader
Replacement Kit – Springs, Pins, & Detents
Rifle ONLY Stabilizing Brace
Ruger 10/22 Carbine
Sylvan Arms GcB100 AR-15 to 9mm Glock Conversion Block
US Palm AK Pistol Grip – FDE
US Palm AK Pistol Grip, FDE. Formed of resilient flat dark earth polymer, this US P.A.L.M. pistol grip is designed for the AK platform like the AK-47, AK-74 & AKM as well as similar rifles which include the RPK, Tabuk and Serbian M70, M64, M21 & M72 models. The grip carries a design meant to drive the shooter’s hand up to increase firing control / comfort and is also ambidextrous. Constructed to endure any and all wear, this pistol grip includes an installation stock screw, washer and lock washer. US PALM AK platform grips give you the most positive and reliable grip. Proudly made in the USA, trust US PALM for high quality AK accessories and gear.Addressing a common concern among AK owners that the standard grip is too small, the US PALM AK Grip delivers more control through an ergonomic, ultimately more comfortable, design.This full-size Westernized rifle grip features a palm swell shaped to drive the user’s hand up and into the receiver/grip junction. Aggressive stippling ensures a positive grip.
