SPECIFICATIONS:
Brand: Holosun
Optic Type: Red Dot
Model: HS507C X2 Micro Red Dot
Magnification: 1x
Illumination: Yes
Illumination Color: Red
Shake-Awake: Yes
Solar Recharging: Yes
Battery Type: CR1632
Lens Diameter: 23mm
MOA-Adjustments: 1-MOA Click
Reticle: 32 MOA Ring & 2 MOA Dot
Turrets: Exposed
Max Elevation Adjustment: 50 MOA
Max Windage Adjustment: 50 MOA
Accessories Included: Cover
Holosun Technologies, 507C-X2, Red Dot, 32 MOA Ring & 2 MOA Dot, Black Color, Side Battery, Solar Failsafe
$384.99 Original price was: $384.99.$329.99Current price is: $329.99.
The new HS507C Micro Red Dot System from Holosun is a pistol-sized optic with an open frame for a great sight picture, clear glass and a rugged 7075 aluminum housing. It is powered by a CR2032 battery and Holosun’s innovative Solar Fail-safe back up. The HS507C will run up to 10 years on a single battery on setting 6, dot only. Featuring Holosun’s Multi-reticle system, the HS507C allows the operator to switch the reticle between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only, all at the push of a button. Better yet, the same LED projects all three reticles, so no re-zeroing is necessary. It comes equipped with Holosun’s Shake Awake technology with last setting recall.
*Allow up to 2 weeks for shipping*
Shipping and Returns
Shipping
We are pleased to offer shipping via UPS Ground or 2-Day Air for all items.
Returns
We are committed to ensuring your satisfaction. If you find any non-firearm merchandise defective upon receipt, we will gladly accept returns and provide your choice of a replacement item (subject to availability) or a full refund. Please note that Arm Safe Supply cannot be held responsible for items damaged during shipping. In such cases, we kindly ask you to file a claim with the carrier. Should you receive a defective item, please call us immediately at +1 713 766 9931 to request a return label.
Important Information for Firearm Returns
We kindly request that you thoroughly inspect all firearms before proceeding with the transfer. Once a new firearm is transferred to you, it is considered used, even if it remains unfired. As a result, we are unable to provide a full refund for new firearms after they have been transferred into your possession. Please note that we do not reimburse FFL transfer fees on returned items.
We understand that some manufacturer defects may not be identifiable during the initial inspection. If you discover a defect after the transfer, the firearm must be returned directly to the manufacturer for replacement or repair in accordance with their warranty policy. This approach allows you to avoid the additional transfer fees associated with returning the firearm to us through your local FFL dealer.
Please do not send defective firearms directly to Arm Safe Supply. Manufacturer-repaired firearms can be returned directly to you without additional FFL transfer or associated fees. However, if the manufacturer decides to replace the firearm, the replacement must be transferred through your local FFL dealer to document the new serial number.
Ammunition Sales
Please note that all ammunition sales are final.
By using and ordering from our site, you agree to these terms. We appreciate your understanding and thank you for your cooperation.
Related products
G0 Grip Module
*Lead time is currently 8-10 weeks*
The G0 grip module is a SLS printed grip that the G0 chassis installs into, in order to complete the lower part of the G0 pistol.
This product also includes the G0 Special Parts kit, a series of pins and springs required to secure the G19 LPK into the milled G0 chassis. These are:
- 1x rear FCG pin: 3mm diameter, 18mm long dowel pin
- 1x front FCG pin: 4mm diameter, 22mm long dowel pin
- 2x grip module pins: 3mm diameter, 28mm long slotted spring pin (these replace the dowel pins in the G19 Gen 3 LPK)
- 1x slide lock spring: 0.12″ OD, 0.016″ wire, 0.25″ long coil spring
This grip module is made from high-quality SLS, which is heat resistant and will facilitate G0 longevity. You can also print your own grip module at home using the file available for free at DEFCAD.com.
Note: this product does not include the pins needed to install the assembled chassis into the grip module. These pins are instead included in any G19 Gen 3-style lower parts kit.