TOP CATEGORIES
SALE PRODUCTS
10.5″ 5.56 NATO 12″ SLANT M-LOK MOE EPT SBA3 PISTOL KIT
AR15 Pistol build kit includes parts necessary to complete your 80 percent AR15 lower [not included]. 10.5″ 4150V Chrome Moly vanadium steel, nitride treated barrel chambered in 5.56 NATO with a 1 in 7″ twist. Carbine-length gas barrel is finished off with a 12″ Slant End M-Lok Rail, a low profile gas block and Fluted Flash Can. Includes charging-handle, bolt carrier group, lower parts kit, and SBA3 pistol brace.
Ships to your doorstep
100% legal in free states
Secure payment processing
16” 5.56 AR-15 STAINLESS BARREL RIFLE BUILD KIT
AR15 Rifle build kit includes parts necessary to complete your 80 percent AR15 lower [not included]. 16” 5.56 carbine gas upper features stainless steel barrel, MLok 13.5” handguard and includes charging-handle, bolt carrier group, lower parts kit, and Magpul stock.
Ships to your doorstep
100% legal in free states
Secure payment processing
16″ 5.56 M4 ODG RIFLE BUILD KIT
AR15 Rifle build kit includes parts necessary to complete your 80 percent AR15 lower [not included]. 16” M4 5.56 carbine-length gas upper features Magpul MOE ODG Handgaurds and includes charging-handle, bolt carrier group, lower parts kit, and Magpul stock.
Ships to your doorstep
100% legal in free states
Secure payment processing
20″ .308 WIN COMPLETE UPPER RECEIVER- WITH BCG & CH
Complete AR-308 Upper Receiver in .308WIN. Features an 20” stainless steel barrel, a 1:10 twist rate, and 5 position adjustable gas block. Includes bolt carrier group and charging handle. Lower parts kit, 80% Lower, and sights not included.
Ships to your doorstep
100% legal in free states
Secure payment processing
SPECIAL OFFER
AR-15 EPT CLASSIC LOWER PARTS KIT
MOE® Carbine Stock – Mil-Spec
The MOE Carbine Stock – Mil-Spec model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.The Mil-Spec Model includes a standard 0.30″ thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.Made in the USA.
BORE BOSS®
WORLD’S EASIEST BORE CLEANER
The single piece Dual Action Cable with integrated phosphor bronze brush and braided mop wraps around the unique Flex-Case Handle to keep the system stowed and organized. To use, simply flip, feed, clip, and pull. Throw it in your pack, or put it in your pocket. It’s the next best thing to a self-cleaning gun.
Aves FMDA DD17.2 Rail Kit
Aves Rails is pleased to offer the first commercially available rail kit for the next generation of printed Glock style frame. The FMDA DD17.2 is the most versatile and strongest design available today.
The front rails for this kit are the same high quality and high tolerance rails that are offered in the original FMDA G17 rail kit. The rear rails are an all new design specific to the various DDxx.2 frames. Made from high quality stainless steel. Precision formed to fit your frame perfectly every time. The rear rails are supported by the frame as well as the trigger components. Because of this we have developed a holder to be used in transit to protect your rear rails until they are ready to be installed. This ensures they are the proper size upon delivery, providing you with the easiest assembly of any printed frame.
To complete a DD17.2 frame you will need these rails, a lower parts kit for a gen 3 G17 and a compatible slide for a gen 3 G17.
Aves DDxx.2 Rear Rail Upgrade
These rails are laser cut and bent on an industrial press brake ensuring the highest quality achievable. Designed and tested in collaboration with Deterrence Dispensed to ensure the perfect fit in your frame.
These rear rails are the same as what is offered in the FMDA DD17.2, DD19.2 and DD26.2 rail kits. Because the front rail from a version 1 G17 and G19 kit are unchanged with version 2 this is all you need to upgrade your old kit.
These rails are shipped in a 3d printed holder to ensure safe transportation of the rail. Simply push the pin out of the printed holder and install it in your frame.
PSA PA-15 CLASSIC AR-15 RIFLE 5.56 16" NITRIDE M4 CARBINE, BLACK
Original price was: $849.99.$469.99Current price is: $469.99.
Add to cart MOST POPULAR
16″ 5.56 M4 ODG RIFLE BUILD KIT
Original price was: $519.00.$419.00Current price is: $419.00.
Matrix Arms Foxtrot 9.5″ AR-15 M-LOK Free Float Handguard – Black
Original price was: $75.99.$69.99Current price is: $69.99.16” 5.56 AR-15 STAINLESS BARREL RIFLE BUILD KIT
Original price was: $419.00.$359.00Current price is: $359.00.
FOR TRAVELERS
AR-15 EPT CLASSIC LOWER PARTS KIT
MOE® Carbine Stock – Mil-Spec
The MOE Carbine Stock – Mil-Spec model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.The Mil-Spec Model includes a standard 0.30″ thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.Made in the USA.
BORE BOSS®
WORLD’S EASIEST BORE CLEANER
The single piece Dual Action Cable with integrated phosphor bronze brush and braided mop wraps around the unique Flex-Case Handle to keep the system stowed and organized. To use, simply flip, feed, clip, and pull. Throw it in your pack, or put it in your pocket. It’s the next best thing to a self-cleaning gun.Aves FMDA DD17.2 Rail Kit
Aves Rails is pleased to offer the first commercially available rail kit for the next generation of printed Glock style frame. The FMDA DD17.2 is the most versatile and strongest design available today.
The front rails for this kit are the same high quality and high tolerance rails that are offered in the original FMDA G17 rail kit. The rear rails are an all new design specific to the various DDxx.2 frames. Made from high quality stainless steel. Precision formed to fit your frame perfectly every time. The rear rails are supported by the frame as well as the trigger components. Because of this we have developed a holder to be used in transit to protect your rear rails until they are ready to be installed. This ensures they are the proper size upon delivery, providing you with the easiest assembly of any printed frame.
To complete a DD17.2 frame you will need these rails, a lower parts kit for a gen 3 G17 and a compatible slide for a gen 3 G17.
Aves DDxx.2 Rear Rail Upgrade
These rails are laser cut and bent on an industrial press brake ensuring the highest quality achievable. Designed and tested in collaboration with Deterrence Dispensed to ensure the perfect fit in your frame.
These rear rails are the same as what is offered in the FMDA DD17.2, DD19.2 and DD26.2 rail kits. Because the front rail from a version 1 G17 and G19 kit are unchanged with version 2 this is all you need to upgrade your old kit.
These rails are shipped in a 3d printed holder to ensure safe transportation of the rail. Simply push the pin out of the printed holder and install it in your frame.
SALE PRODUCTS
Aves FMDA DD17.2 Rail Kit
Aves Rails is pleased to offer the first commercially available rail kit for the next generation of printed Glock style frame. The FMDA DD17.2 is the most versatile and strongest design available today.
The front rails for this kit are the same high quality and high tolerance rails that are offered in the original FMDA G17 rail kit. The rear rails are an all new design specific to the various DDxx.2 frames. Made from high quality stainless steel. Precision formed to fit your frame perfectly every time. The rear rails are supported by the frame as well as the trigger components. Because of this we have developed a holder to be used in transit to protect your rear rails until they are ready to be installed. This ensures they are the proper size upon delivery, providing you with the easiest assembly of any printed frame.
To complete a DD17.2 frame you will need these rails, a lower parts kit for a gen 3 G17 and a compatible slide for a gen 3 G17.
Dealer Price Universal Clamps
A set of two 1.5” Universal Clamps (including feet and soft jaws) for use with several GG3 / 3-S applications, including:
- Zero Percent Receivers
- Optic cuts
These clamps will be used for future GG3 cutcode releases, and can also be used for general-purpose custom milling applications as well.
These clamps are the same as those used in the Zero Percent Starter Kit and the Optic Cut kit. If you have purchased either of these products, then you may not need to purchase another set of clamps. Review our reference guide to confirm that you have the correct clamp version.
Ghost Smith & Wesson M&P Shield (Manual Safety) 3D Printed Parts Kit w/Files
Smith & Wesson M&P Shield 9MM Parts Kit with manual safety. Includes 3D printable file and one 7 round magazine.DOES NOT COME WITH FRAME*As this product is under our 3D printing section, some part(s) must be 3D printed by the end user to complete this build*Does not ship to NJ, WA, or internationally.
FAVORITE GARDEN
Beretta 1301 Tactical Shotgun
Original price was: $1,399.00.$1,199.00Current price is: $1,199.00.Beretta 1301 Tactical Shotgun
Original price was: $1,399.00.$1,199.00Current price is: $1,199.00.
OUR BLOG
12
Mar
Sig Sauer P226 MK25: The Ultimate 9mm Pistol for Performance and Reliability
The Sig Sauer P226 MK2...
12
Mar
The Beretta A300 Ultima: An In-depth Guide On the Best Semi-Auto Shotgun
The Beretta A300 Ultima
25
Feb
Glock 43 Single Stack: The True Compact Pistol for Concealed Carry
Being prepared for any situation in today’s unpredictable world is essential, whether in life or o...
19
Nov
PSA M4 Carbine: The Ultimate Guide to Performance, Features, and Benefits
The PSA M4 Carbine is a trusted firearm in the world of tactical rifles, combining durability, pre...